What is a Lawn Sprinkler Controller?

The lawn sprinkler controller is a fully automated device wherein you can manipulate the sprinkling start time, the zone run time and the days when to water each zone. It may seem to be a complicated process at the start as it involves a programming procedure. The instructions, however, are simple enough to follow so you will not get lost along the way. The lawn sprinkler controller is available in models with various stations -- 4-station, which runs four watering zones; 6-station, which runs six watering zones; and so on.

How to install your new lawn sprinkler controller

The most complicated task in installing a lawn sprinkler controller is the wiring process. However, it can be done by someone without much electrical knowledge. The instructional guidelines ensure that the wires are connected to the proper terminals. Safety electrical rules should likewise be observed. Before installing your lawn sprinkler controller, turn off the main power switch without any battery back-up. The lawn sprinkler controller output should be 24 volts. It would help to use a gel-filled connector for a positive waterproof connection.

Rain8 - X10 Sprinkler Controller

This is an 8-zone irrigation controller capable of linking 256 operation zones. An irrigation schedule can be programmed using the reception of a single X10 sprinkler controller power line carrier command. Its dual mode capability allows each zone to be manipulated independently. The Rain8 has to be configured in the computer using Windows or Mac applications. The procedure will enable you to define the X10 address zone assignments and to set the mode for operation. The Rain8 can also operate in two different modes.

Home Page

Projects

About different sprinklers

Where to buy